Ahuja Sound Solutions

Back

Amplifiers

500 WATTS

High Wattage PA Power Amplifier

Line Input 200mV/1V switchable for connecting a mixer or another amplifier.
Resettable circuit breaker for protection against overload and short circuit.
Instant transfer to DC power (Car Battery) if AC power fails.
Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.
Ideal for large installations where a high power output is required. A combination of a SSA-5000EM and one SPA-5000EM can deliver 1000W power output.

send enquiry

Power Output	750W Max., 500W RMS at 10% THD, 450W RMS at 5% THD, 415W RMS at 2% THD
Output Regulation	≤ 2 dB, no load to full load at 1kHz
Input Channels	1 × Line 200mV/100kΩ, 1 × Line 1V/50kΩ
Frequency Response	50-15,000Hz ±3dB
Signal to Noise Ratio	60dB
Tone Controls	Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Speaker Outputs	4Ω, 8Ω, 70V & 100V
Power Supply	AC: 220-240V 50/60Hz DC: 36V (3×12V Car Battery)
Power Consumption	AC: 1000VA DC: 8A
Dimensions	W510 × H172 × D385 mm
Weight	25.7kg

Operation Manual

10065 KB