products

Conference Systems
MIXER AMPLIFIERS
POWER AMPLIFIERS
Mixers
Microphones
Speakers
Portable PA
COUNTER COMMUNICATION SYSTEM
Accessories
Paging System
Back

Microphones

Wireless Microphones

AWM-495VHL

DUAL PA VHF Wireless Microphones

.

  • Compact, lightweight, Dual Channel VHF Wireless Microphone System available in different frequency groups.
  • Combination of a handheld dynamic transmitter & a bodypack transmitter for a wide variety of applications.
  • Internal antennas in the transmitter and two telescopic antennas in the Receiver for clear and distortion free reception.
  • Receiver operates on 12V DC through an AC Adaptor supplied alongwith the system. Each transmitter operates with a 2x1.5V AA Pencil Cells.
  • Transmitters have 2-position ON/OFF slide switch.
  • Audio output from receiver available at OUT 1 & OUT 2 individually and as mixed output at OUT 1 + 2.
  • Ideal for: PA Applications... Stage & Auditoriums... Seminar Halls... Places of Worship... Recreation Centres...
send enquiry
‹ ›

HANDHELD TRANSMITTER

.

RF Output Power

15mW (Max.)

Modulation Mode

FM (F3E)

Microphone Element

Dynamic, Cardioid

Dynamic Range

80dB

Frequency Response

50-12,000Hz

Current Consumption

≤130mA

Power Requirement

3V (2 × 1.5V AA Pencil Cells)

Controls

Transmitter ON/OFF Switch

Indication

Red LED for indicating transmitter ON

Dimensions

ø55 (L248) mm

Weight

180g (w/o battery)

TIE-CLIP TRANSMITTER

.

RF Output Power

15mW (Max.)

Modulation Mode

FM (F3E)

Microphone Element

Condenser, Omnidirectional

Dynamic Range

80dB

Frequency Response

80-15,000Hz

Current Consumption

≤130mA

Power Requirement

3V (2 × 1.5V AA Pencil Cells)

Controls

Transmitter ON/OFF Switch, Volume Control

Indication

Red LED for indicating transmitter ON

Dimensions

W67 x H32 x D95 mm

Weight

60g (w/o battery)

RECEIVER

.

Frequency Stability

± 0.005% Quartz Crystal Controlled

Receiving Method

Non-diversity

Audio Output

Channel 1: 0-55mV / 1kΩ, Channel 2: 0-55mV / 1kΩ Channel 1+2: 0-55mV / 1kΩ

Signal to Noise Ratio

> 80dB

Distortion

< 0.5%

Frequency Response

50-15,000Hz

Antenna

Telescopic

Power Requirement

240V AC 50Hz for AC adaptor (supplied along with)

Controls

Power On / Off Switch, Volume Control for Channel-1, Volume Control for Channel-2

Indications

Red LED for Power ON, Green LED for RF reception on Channel-1, Green LED for RF reception on Channel-2

Dimensions

W230 x H42 x D150 mm

Weight

353g