Ahuja Sound Solutions

Back

POWER AMPLIFIERS

1000 WATTS

2 ZONE PA POWER AMPLIFIER

Ahuja model BTZ-10000 is rugged, reliable, cost-effective 1000 watts Two Zone Amplifier. BTZ-10000 is ideal for multi-speaker installations where a user needs to separately set power levels for two separate areas such as indoors & outdoors.
Stereo Music input for DJ programmes.
Facilitates connection and operation of two groups of speakers simultaneously on ‘Mono’ mode. Ideal for Places of Worship.
Line Input & Output on each zone for connecting to a Mixer and Booster Amplifier respectively.
Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units.
Resettable circuit breaker for protection against overload and short circuit.
Zone On/Off facility. Output levels of each Zone can be set independently to desired levels and the zones can be switched On/Off without disturbing the volume settings.
Instant transfer to DC power (Car Battery) if AC power fails.
Bar Graph Signal Display.

send enquiry

‹ ›

Power Output	750W + 750W Max., 500W + 500W RMS at 10% THD 450W + 450W RMS at 5% THD, 415W + 415W RMS at 2% THD
Output Regulation	≤ 2 dB, no load to full load at 1kHz
Input Channels	Mono 2 × 200mV/100kΩ, Stereo L/R 200mV/100kΩ, Line L/R 1V/50kΩ
Frequency Response	50-15,000Hz ±3dB
Signal to Noise Ratio	60dB
Tone Controls	Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs	Line 1V/1kΩ
Speaker Outputs	4Ω, 8Ω, 70V & 100V for each zone
Power Supply	AC: 220-240V 50/60 Hz DC: 36V (3×12V Car Battery)
Power Consumption	AC: 1600VA DC: 16A
Dimensions	W510 × H220 × D440 mm
Weight	40.0kg

Operation Manual

8302 KB

Product Literature

1132 KB

POWER AMPLIFIERS : 2 Zone PA Power Amplifiers

FEATURES :

Ahuja model BTZ-10000 is rugged, reliable, cost-effective 1000 watts Two Zone Amplifier. BTZ-10000 is ideal for multi-speaker installations where a user needs to separately set power levels for two separate areas such as indoors & outdoors.
Stereo Music input for DJ programmes.
Facilitates connection and operation of two groups of speakers simultaneously on ‘Mono’ mode. Ideal for Places of Worship.
Line Input & Output on each zone for connecting to a Mixer and Booster Amplifier respectively.
Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units.
Resettable circuit breaker for protection against overload and short circuit.
Zone On/Off facility. Output levels of each Zone can be set independently to desired levels and the zones can be switched On/Off without disturbing the volume settings.
Instant transfer to DC power (Car Battery) if AC power fails.
Bar Graph Signal Display.

SPECIFICATIONS :

Power Output	750W + 750W Max., 500W + 500W RMS at 10% THD 450W + 450W RMS at 5% THD, 415W + 415W RMS at 2% THD
Output Regulation	≤ 2 dB, no load to full load at 1kHz
Input Channels	Mono 2 × 200mV/100kΩ, Stereo L/R 200mV/100kΩ, Line L/R 1V/50kΩ
Frequency Response	50-15,000Hz ±3dB
Signal to Noise Ratio	60dB
Tone Controls	Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs	Line 1V/1kΩ
Speaker Outputs	4Ω, 8Ω, 70V & 100V for each zone
Power Supply	AC: 220-240V 50/60 Hz DC: 36V (3×12V Car Battery)
Power Consumption	AC: 1600VA DC: 16A
Dimensions	W510 × H220 × D440 mm
Weight	40.0kg